All

As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch the direct replacement aluminium under tray for the BMW F80 M3 and F82/F83 M4 models. The solution to creating a direct replacement under tray in aluminium began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment that reuses all original mounting points. As a result, it requires no drilling or cutting and is completely reversible if required.  Designed to work with the AIRTEC Motorsport larger capacity oil cooler, which when fitted in place with the original plastic under tray causes to bow outwards due to the oil cooler’s larger size and the BMW under tray’s weak construction. Our direct replacement under tray is made from 2mm aluminium to ensure durability and has also been designed to accommodate the larger dimensions of the AIRTEC Motorsport oil cooler. The product also comes with pre-cut rubber trims to seal the under tray and ensure the cooling effectiveness with the options of a larger rubber trim for the original oil cooler or a smaller rubber trim for the AIRTEC Motorsport oil cooler both inside the box. It has also been designed to work with the AIRTEC Motorsport GTS-style aero under tray pan to create a comprehensive under tray package.  Finished in a high-quality black powder coat finish, the under tray offers improved protection, durability and cooling effectiveness. Please note: The under tray uses existing mounting points – but it is essential the fixings you use to secure it are of good quality. The original BMW fittings should only be used if they’re in good condition. Worn, corroded or broken fixings should be replaced with new items from BMW, as failure to do so may cause the under tray to work loose. Features: · Direct replacement for F80 M3 and F82/F83 M4 models · Created from 3D scan and CAD software for perfect fitment · Designed to work with the AIRTEC Motorsport larger capacity oil cooler · Made from high-quality 2mm aluminium for increased strength   Rubber trims to seal the under tray and ensure cooling effectiveness · Uses original mounting points – no cutting or drilling required   Also works with the AIRTEC Motorsport GTS-style aero under tray pan · Comes in a durable black powder coat finish AIRTEC part no: ATMSBMW34

Read more less

As part of our expanding Honda product range, AIRTEC Motorsport is proud to launch our aluminium cooling under tray for the Civic FK8 Type R. When modifying these cars to increase power and torque, an unavoidable by-product is the additional heat level that’s transferred to the car’s cooling system. During sustained hard use, this can become a substantial issue, as coolant temperatures can increase enough to trigger the ECU’s safety features, reducing torque or even putting the car into a limp mode. As a result, we wanted to address the car’s entire cooling system, which included introducing extra venting to improve air flow within the engine bay. Our solution to creating a direct replacement under tray in 2mm aluminium began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment. As a result, it reuses all original mounting points with new stronger fixings supplied, offering improved strength and protection for the underside of the car. More importantly, the large functional vents actively help to pull warm air from the back of the radiator, down under the engine and into the low-pressure area of the car below the under tray. This effectively creates an increased flow path within the engine bay to transfer heat out, helping to reduce engine running temperatures. Designed to work on a standard car or even more effectively in conjunction with our soon to be released AIRTEC Motorsport gearbox cooler, the under tray is finished in a high-quality black powder coat finish, offering improved cooling effectiveness as well as strength and durability. What does an under tray do?The under tray has three main purposes: to protect the underside of the vehicle from foreign objects flicking up and causing damage or accelerated wear. Secondly, to improve aerodynamics by creating a low pressure area as air accelerates past its smooth surface. This reduces drag, which works towards improving grip, handling as well as fuel efficiency. Lastly, on performance models, the under tray often provides increased cooling by either venting cold air to, or extracting warm air from the engine bay. Therefore improving the strength, design, size and cooling effect can offer fantastic benefits. Features: Direct replacement for original Honda Civic FK8 Type under tray Effectively improves engine bay cooling due to functional vents Created from 3D scan and CAD software for perfect fitment Made from high-quality 2mm aluminium for increased strength Uses original mounting points with new stronger fixings supplied Comes in a durable black powder coat finish Fitting instructions included AIRTEC part no: ATMSHON19

Read more less

As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the Fiesta 1.0 EcoBoost Mk7 model suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time due to unwanted blow-by gases and vapours, which can enter the engine from a CCV port or PCV valve. This is particularly prevalent with the EcoBoost engine, which can be known for poor reliability without good preventative maintenance.   AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Fiesta 1.0 EcoBoost Mk7 model utilises the heat shield from our AIRTEC Motorsport Stage 2 induction kit to attach the mounting bracket. As a result, it requires the induction kit to be fitted first and will not work with other induction kits or the original air box.  It features a high-quality laser cut bracket finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. PLEASE NOTE: This kit is designed to fit ONLY with our AIRTEC Motorsport Stage 2 Induction Kit for Fiesta Mk7 1.0 EcoBoost. It attaches to the shield and therefore will NOT fit with any other type of induction kit or with the original air box.  Features: Developed specifically for the Fiesta 1.0 EcoBoost Mk7 Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC Part No: ATMSFO160

Read more less

As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our inlet manifold upgrade aimed at modified Mk4 Focus ST owners who want to further improve the performance and potential of their cars for track or fast road use. Direct Replacement FitDesigned to fit 2.3-litre ST models, the manifold is a true direct replacement that utilises all of the original fixtures and fittings, including the standard throttle body and therefore pipework. There are also provisions to fit either the original plastic engine cover or the AIRTEC Motorsport replacement engine cover, and the design also includes a moulded fixing tab to secure the vacuum line, as per the original. The comprehensive fitting kit includes a thermal gasket to help reduce heat transfer from the cylinder head, together with all fixtures and fittings, new rubber gaskets as well as detailed installation instructions. Construction Made from high-quality cast aluminium for increased strength over the original plastic assembly, the manifold is finished in high-quality powder-coated black with a raised AIRTEC Motorsport logo, for a neat OEM+ look to improve the appearance of the engine bay. The design also offers improved flow compared to the original, which in-turn offers a notable increase in throttle response. Remapping is not necessary after fitting, but for optimal gains there would be a benefit. A key feature of the manifold is its ability to allow an easy solution for extra fuelling capabilities, thanks to the four port injector bosses and fuel rail fittings. This allows additional fuel to be easily added for big power builds without having to use an inlet manifold port injector spacer. Additional fuel rail available separately here. Features:  True direct replacement fit that requires no additional parts Cast aluminium construction for improved strength Extra fuelling capabilities with port injection bosses Improved flow and increased throttle response Finished in a high-quality black powder coat Includes all fixtures and fittings required to fit Detailed installation instructions included AIRTEC part no: ATMSFO152

Read more less

  As part of our expanding Honda product range, AIRTEC Motorsport is proud to launch our Crank Case Ventilation (CCV) oil catch can upgrade for the Civic Type R FL5 model, suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time due to unwanted blow-by gases and vapours, which can enter the engine from a CCV port or PCV valve. The Honda Civic Type R FL5 features both of these, so we’ve developed kits to cater for each and recommend fitting both for ultimate protection. AIRTEC Motorsport’s solution to developing a CCV catch can kit specifically for the Civic Type R FL5 model utilises the available space at the rear of the engine bay to integrate seamlessly. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a Crank Case Ventilation catch can?The CCV port vents directly from inside the engine’s crank case to the intake system and when under heavy load, such as full throttle, allows significant blow-by gases and vapour to pass, which is what creates the undesirable carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Please note: This currently will only fit with the original turbo inlet pipe. If you have an aftermarket turbo inlet pipe fitted, a relocation mounting bracket will be available soon.  Features: Developed specifically for the Honda Civic Type R FL5 CCV side Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC part no: ATMSHON12

Read more less

As part of our expanding Honda product range, AIRTEC Motorsport is proud to launch our aluminium cooling under tray for the Civic FL5 Type R. When modifying these cars to increase power and torque, an unavoidable by-product is the additional heat level that’s transferred to the car’s cooling system. During sustained hard use, this can become a substantial issue, as coolant temperatures can increase enough to trigger the ECU’s safety features, reducing torque or even putting the car into a limp mode. As a result, we wanted to address the car’s entire cooling system, which included introducing extra venting to improve air flow within the engine bay. Our solution to creating a direct replacement undertray in 2mm aluminium began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment. As a result, it reuses all original mounting points with new stronger fixings supplied, offering improved strength and protection for the underside of the car. More importantly, the large functional vents actively help to pull warm air from the back of the radiator, down under the engine and into the low-pressure area of the car below the under tray. This effectively creates an increased flow path within the engine bay to transfer heat out, helping to reduce engine running temperatures. Designed to work on a standard car or even more effectively in conjunction with our AIRTEC Motorsport gearbox cooler, the under tray is finished in a high-quality black powder coat finish, offering under tray offers improved cooling effectiveness as well as strength and durability. Features: Direct replacement for original Honda Civic FL5 Type under tray Effectively improves engine bay cooling due to functional vents Created from 3D scan and CAD software for perfect fitment Made from high-quality 2mm aluminium for increased strength Uses original mounting points with new stronger fixings supplied Comes in a durable black powder coat finish Fitting instructions included AIRTEC part no: ATMSHON14

Read more less

  As part of our expanding Honda product range, AIRTEC Motorsport is proud to launch our Positive Crankcase Ventilation (PCV) oil catch can upgrade for the Civic Type R FL5 model, suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time due to unwanted blow-by gases and vapours, which can enter the engine from a CCV port or PCV valve. The Honda Civic Type R FL5 features both of these, so we’ve developed kits to cater for each and recommend fitting both for ultimate protection. AIRTEC Motorsport’s solution to developing a PCV catch can kit specifically for the Civic Type R FL5 model utilises the available space at the front of the engine bay to integrate seamlessly. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a Positive Crankcase Ventilation catch can?The PCV valve is a one-way valve that when open allows blow-by gases and vapour produced by the engine to pass from the crank case and back into the inlet manifold, which is what creates the undesirable carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the Honda Civic Type R FL5 PCV side Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC part no: ATMSHON10

Read more less

  As part of our expanding Peugeot product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the 208 GTI model suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time due to unwanted blow-by gases and vapours, which can enter the engine from a CCV port or PCV valve. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the 208 GTI model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the 208 GTI Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC Part No: ATMSP2082  

Read more less

As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our direct replacement aluminium under tray for the Yaris GR Gen 1 and Gen 2 models including automatics. The IssueThe original under tray on Gen 1 cars features no venting at all and is made from a weak fibre material construction which will be prone to failure over time. Gen 2 cars feature a plastic under tray but with a small single vent for the transfer case alone.  ConstructionOur solution to creating a direct replacement under tray began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment that reuses all original mounting points and fixings. Made in 2mm aluminium and finished in a high-quality black powder coat, our under tray offers an enhanced level of protection to the underside of the car but more importantly, the design has also been carefully considered to ensure improved cooling and air flow to the vital transmission components.  CoolingWhilst the Gen 1 under trays feature no cooling at all, the Gen 2 under trays feature a basic duct for the transfer case at the rear, as clearly Toyota see this as an area that requires cooling. The AIRTEC Motorsport under tray therefore utilises a much larger scoop for the rear to force more air flow and offer better cooling. It also features a built in gearbox cooling duct, together with a venting section behind it to create air flow to and from the transmission and reduce temperatures. The comprehensive design also features rear ventilation to allow heat to exit the undertray together with side vents to further improve air flow. ConclusionA simple yet effective upgrade that offers improved strength, durability and cooling effectiveness.   Please note: The under tray uses existing mounting points – but it is essential the fixings you use to secure it are of good quality. The original Toyota fittings should only be reused if they’re in good condition. Worn, corroded or broken fixings should be replaced with new items from Toyota, as failure to do so may cause the under tray to work loose. Features: Direct replacement under tray for Yaris GR Gen 1 and Gen 2 (incl. Automatic) Improved cooling to vital transmission components Uses all original mounting points – no cutting or drilling required Created from 3D scan and CAD software for perfect fitment Made from 2mm aluminium for increased strength Comes in a durable black powder coat finish Uses existing fixtures and fittings   Registered Design Right number: Application Pending AIRTEC part no: ATMSYGR32

Read more less

As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our header tank upgrade to suit Ford focus MK3 RS & ST A direct replacement for the original plastic tank, the AIRTEC Motorsport header tank is made from lightweight aluminium and comes in a high-quality powder coated black finish. It also features a sight glass to view the coolant level and comes with a new cap. The tank uses original fixing points, hoses and connectors so no drilling or cutting is required and fitting is a simple process. With an improved look to the engine bay and increased strength so the tank will not leak over time, this is a simple yet effective upgrade.  Features: Direct replacement header tank for the Ford Focus MK3 RS Lightweight aluminium construction High-quality black powder coat finish Sight glass to view coolant level Uprated high-pressure cap included No drilling or cutting required  

Read more less

Designed to replace the original for lights on the FK2 Civic Type R. Made from aluminium and finished in a high-quality black powder coat, the grilles are a direct replacement that reuse the original bolts. There is no cutting or trimming required making installation a simple process. AIRTEC part number: ATMSHON13

Read more less

A neat solution to improve air flow to the area above the crash bar and provide further cooling to our power steering cooler or oil cooler (when mounted above the crash bar). This has been designed specifically for the Mk6 Fiesta where the crash bar runs directly behind the lower part of the number plate recess, which means if you cut out or hole saw the bumper recess for increased air flow, it largely just reveals an unsightly crash bar. Our solution ensures there is improved air flow above the crash bar whilst looking aesthetically pleasing. Made from aluminium and finished in a high-quality black powder coat, the panel comes with all fixtures and fittings, as well as detailed installation instructions.  AIRTEC part no: ATMSFO167

Read more less

As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our header tank upgrade to suit Mk6 ST150 models. A direct replacement for the original plastic tank, the AIRTEC Motorsport header tank is made from lightweight aluminium and comes in a high-quality powder coated black finish. It also features a sight glass to view the coolant level and comes with an uprated high-pressure cap. The tank uses original fixing points, hoses and connectors so no drilling or cutting is required and fitting is a simple process. With an improved look to the engine bay and increased strength so the tank will not leak over time, this is a simple yet effective upgrade.  Features: Direct replacement header tank for the Mk6 Fiesta ST150 Lightweight aluminium construction High-quality black powder coat finish Sight glass to view coolant level Uprated high-pressure cap included No drilling or cutting required AIRTEC Part No: OLD PART NUMBER ATMSFO160  -NEW NUMBER ATMSFO171

Read more less

  Designed to fit solely with our AIRTEC Motorsport Mk3 Focus ST/RS and Mk4 Focus ST cast inlet manifold upgrade, this fuel rail allows four additional top feed fuel injectors to be easily added. Working in conjunction with the car’s original Direct Injection set up, this offers hugely increased fuelling capabilities that are required when pushing power to a much higher level.  Machined from high-quality aluminium and finished in anodised black, the fuel rail features ORB-8 fittings at both ends that adapt to AN-6 male fittings, which come supplied.  The comprehensive fitting kit also includes mounting brackets, O-rings for the ORB fittings as well as all fixtures required to fit directly to the manifold.  Please note: Does not include injectors, fuel lines or fuel line fittings for the engine side.  AIRTEC part no: ATMSFO161

Read more less

  As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our inlet manifold upgrade aimed at modified Mk3 Focus ST and RS owners who want to further improve the performance and potential of their cars for track or fast road use. Direct Replacement FitDesigned to fit both the 2.0-litre ST and 2.3-litre RS models, the manifold is a true direct replacement that utilises all of the original fixtures and fittings, including the standard throttle body and therefore pipework. There are also provisions to fit either the original plastic engine cover or the AIRTEC Motorsport replacement engine cover, and the design also includes a moulded fixing tab to secure the vacuum line, as per the original. The comprehensive fitting kit includes a thermal gasket to help reduce heat transfer from the cylinder head, together with all fixtures and fittings, new rubber gaskets as well as detailed installation instructions. Construction Made from high-quality cast aluminium for increased strength over the original plastic assembly, the manifold is finished in high-quality powder-coated black with a raised AIRTEC Motorsport logo, for a neat OEM+ look to improve the appearance of the engine bay. The design also offers improved flow compared to the original, which in-turn offers a notable increase in throttle response. Remapping is not necessary after fitting, but for optimal gains there would be a benefit.  A key feature of the manifold is its ability to allow an easy solution for extra fuelling capabilities, thanks to the four port injector bosses and fuel rail fittings. This allows additional fuel to be easily added for big power builds without having to use an inlet manifold port injector spacer. Please note: we do not currently supply a direct fit fuel rail but the option will be available in the future.  Features:  True direct replacement fit that requires no additional parts Cast aluminium construction for improved strength  Extra fuelling capabilities with port injection bosses Improved flow and increased throttle response   Finished in a high-quality black powder coat Includes all fixtures and fittings required to fit Detailed installation instructions included  AIRTEC part no: ATMSFO151

Read more less

Following an extensive development process by our in-house design engineer team, AIRTEC Motorsport is proud to launch our new rear wing kit for the BMW F22/F23 2-Series/F87 M2, suited to track or fast road use.  Several designs and variations were tried before we settled on this particular design, which has been designed to allow the car’s existing laminar flow to direct clean air under the aerofoil blade to produce a low pressure area, which will increase rear downforce and therefore stability at speed. The DevelopmentEager to create an unrivalled product in this segment, we began with a 3D scan of the boot lid so we could design a CNC bracket that’s mounting surface followed the gentle curvature of the boot lid. This was to ensure that when the bracket was fully tightened down it would not deform the boot lid, as you see in some cars fitted with these kinds of spoilers. We also chose to mount the bracket in an area that is double skinned for additional rigidity.  After trying other aerofoils, we also chose to develop a new longer aerofoil blade solely for this application.  The DesignWe made the decision early on to create end plates that would also serve as the uprights to mount the spoiler. This clever design allows the entire width of the aerofoil to work more efficiently, as all of the air passing under it is completely undisturbed, which is not possible with centre mounted uprights. The end plates are also adjustable to suit a preferred set up.  Whilst the wing design ensures its as wide as possible to allow as much clean air underneath it, it does not exceed past the car’s width or height dimensions to adhere to Nürburgring Regulations and Motorsport Blue Book Regulations. It’s also been designed to work with the original BMW lip spoiler (not pictured here). The mounting brackets are secured to the boot lid using six M6 bolts and once fitted, the fittings are all hidden from outside view. Please note: this does require drilling to the boot lid. The kit features laser cut uprights in 3mm steel to ensure rigidity and are finished in a high-quality, satin black powder coat. The comprehensive kit also includes all fixtures and fittings, as well as detailed fitting instructions. Features: Designed and developed specifically for the BMW F22/F23 2-Series/F87 M2 CNC mounting brackets that follow the curve of the boot lid to avoid deformation  Uprights work as the end plates to ensure the aerofoil works more efficiently  Rigid fixings ensure the wing is fully supported  High-quality black powder coated finish Comprehensive fitting kit with all fixtures, fittings and detailed instructions   PLEASE NOTE: Drilling to the boot lid is required to fit this product We endeavour to deliver an extremely high-quality product but due to the handmade manufacturing process there is the possibility of minopr imperfections on the centre wing blade.   AIRTEC Part No: ATMSBMW21  

Read more less

  As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our inlet manifold upgrade aimed at modified Yaris GR owners who want to further improve the performance of their cars for track or fast road use. The DesignWe wanted to develop a manifold with an improved design to allow more flow, whilst introducing longer inlet runners to help produce more power at lower engine speed. We also wanted to incorporate a design that increased air flow balance across the three cylinders. Crucially, we were also determined to create a true direct replacement manifold that required no further modifications, such as custom fabrication or a costly aftermarket ECU. After a thorough development process that saw us simulate and test several different designs, the result is a manifold unlike any other on the market. Tested – Increased and Balanced FlowOur freer-flowing design measured an improvement in flow of 36% in comparison to the original. Furthermore, by flow testing the original manifold and using runner number two as the benchmark, our test data revealed runner number one flowed a 13% difference on average whilst runner number three flowed an 11% difference on average.In direct comparison, the same test conducted on our AIRTEC Motorsport manifold revealed a difference of just 2% on runner number one and only 4% on runner number three, therefore providing much more equal balance across the cylinders, which is crucial for safe and efficient fuelling as well as consistent power and torque. Direct Replacement Fit We also completed our secondary goal of ensuring the manifold was a true direct replacement by utilising the original throttle body and pipework. The manifold also includes moulded fixing tabs to secure the coolant lines and wiring loom, which secure in place as per the original. Lastly, the manifold allows the original rubber gaskets to transfer over for a simple and easy installation process. If you have an AIRTEC Motorsport catch can fitted, please choose from the drop down menu, as the breather fittings require different take offs.Please note: the manifold has been designed to also allow a larger 54mm throttle body to fit if preferred, but this will require additional works to the boost pipework and ECU. Construction Made from high-quality cast aluminium for increased strength over the original plastic assembly, the manifold is finished in high-quality powder-coated black for a neat OEM+ look to improve the appearance of the engine bay. The comprehensive fitting kit includes two replacement Pro Hoses silicone, all fixtures and fittings as well as detailed installation instructions.Please note: the original engine cover will need trimming to fit or you can fit the AIRTEC Motorsport replacement engine cover.  In summary, our manifold is unique, offering unparalleled benefits, proven gains and easy installation, and all at a great value cost.   Dyno TestedThe manifold was tested on our own demonstration Yaris GR fitted with a big turbo conversion, Syvecs ECU and all associated modifications. With no changes (no mapping or increased boost) a back-to-back test revealed the fitment of the manifold alone saw power increase from 405.2bhp to 415.0bhp – an increase of nearly 10bhp with no other modifications. Response also appeared to increase lower in the rev range and with mapping to suit, further increases would likely to be seen.   Features:  36% increase in internal flow compared to original manifold Improved engine performance and throttle response Dyno testing showed increases to both power and torque Proven to distribute flow more evenly across all three cylinders True direct replacement fit that requires no additional parts No ECU/throttle body upgrade or pipework required Will also work with larger 54mm throttle body, if preferred Provisions to secure original coolant lines and wiring loom Cast aluminium construction for improved strength Finished in a high-quality black powder coat Includes all fixtures and fittings required to fit Detailed installation instructions included Registered Design Right number: 6410582 AIRTEC part no: ATMSYGR23

Read more less

  As part of our expanding VW product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the Polo GTI AW model. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Polo GTI AW model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the VW Polo GTI AW Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High-quality powder-coated black finish Pro Hoses silicone hoses Includes all fixtures and fittings Features detailed fitting guide Registered Design Right number: Application Pending  AIRTEC part no: ATMSVAG19

Read more less

As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our uprated DCT undertray for the E90, E92 and E93 M3 models. The front part of the original undertray on these cars is notoriously weak due to its fibre material construction and as a result is prone to failure over time. Our solution is a direct replacement undertray made in aluminium that reuses all of the original mounting points to ensure a perfect and secure fitment. Finished in a high-quality black powder coat finish, the undertray offers improved strength and durability, and is supplied with all fixtures and fittings, including installation instructions. Fitment: Replaces BMW part number 51757898849   Features: •     Direct replacement for original E9x M3 DCT undertray •     Made from high-quality aluminium for increased strength •     Uses all original mounting points – no cutting or drilling required •     Comes in a durable black powder coat finish •     Supplied with all fixtures and fittings •     Installation instructions included  

Read more less

As part of our expanding Suzuki product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the Swift Sport Boosterjet model. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Swift Sport model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the Suzuki Swift Sport Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High-quality powder-coated black finish Pro Hoses silicone hoses Includes all fixtures and fittings Features detailed fitting guide Registered Design Right number: Application Pending  AIRTEC part no: ATMSSUZ3  

Read more less

As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our direct replacement aluminium undertray for the E90, E92 and E93 M3 models. The front part of the original undertray on these cars is notoriously weak due to its fibre material construction and as a result is prone to failure over time. Our solution is a direct replacement, three-piece undertray made in aluminium that reuses all of the original mounting points to ensure a perfect and secure fitment. Unlike others on the market, the design of the oil cooler extraction ducting has also been carefully considered to imitate the original in order to maintain sufficient cooling. As a result, the sides of the ducts are enclosed against the oil cooler and the radius of the ducting increased in size. There are also brake duct cut outs to allow the use of a GT4-style splitter with brake cooling ducts. Finished in a high-quality black powder coat finish, the undertray offers improved strength, durability and cooling effectiveness. Features:•     Direct replacement for original E9x M3 undertray•     Made from high-quality aluminium for increased strength•     Uses all original mounting points – no cutting or drilling required•     Improved oil cooling extraction through enclosed ducting•     Allows for GT4-style splitter with brake cooling ducts•     Comes in a durable black powder coat finish•     Supplied with all fixtures and fittings•     Detailed installation instructions Registered Design Right number: Application Pending

Read more less

  As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our wheel arch liner clearance grilles for the BMW G87 M2, G80 M3 and G82 M4 models. The IssueThe original BMW arch liners feature a vented section to allow air to escape from the front bumper. However, this section has very little clearance to the tyre when turning, which is acceptable for a standard car, but when modified with lowered suspension, larger tyres or even simple wheel spacers, it causes the tyre to make contact with the vented section and instantly damages it. The plastic fins can then break off and these can also damage the tyre. The SolutionSimple yet effective, our design team developed replacement grilles that can be fitted to the arch liner to provide the necessary extra clearance. Tested on a lowered car with larger tyres, these grilles still ensure large debris cannot pass through whilst allowing air to escape from the front bumper. Made from 2mm aluminium and finished in a high-quality black powder coat, the grilles feature our own hexagonal design that’s laser cut into the grille. The grilles attach to the arch liner with seven fixings each side to ensure they are rigid and the kit comes with all fixtures and fittings, as well as detailed installation instructions. Please note: Drilling and removal of the original vents is required in order to fit. Features:  Kit designed specifically for the G8x M model platform Made from 2mm aluminium with laser cut design Replaces the original BMW plastic grilles Tested on a lowered car with larger tyres Ensure debris cannot pass through and allowing air to escape Attach to the arch liner with seven fixings (drilling required) Long lasting, high-quality black powder coat finish Includes all fixtures and detailed fitting instructions Registered Design Right Number: Application Pending AIRTEC part no: ATMSBMW24  

Read more less

As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our direct replacement aluminium undertray for the BMW G87 M2, G80 M3 and G82 M4 models. The IssueThe original undertray on these cars is made from plastic and features a large opening to allow air to cool the engine’s oil cooler, which is mounted close to the floor. However, due to the oil cooler’s low-level placement and lack of protection from road debris that may flick up, it is left open and exposed to damage, which could cause imminent engine failure. The SolutionOur solution to creating a direct replacement undertray in aluminium began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment that reuses all original mounting points. As a result, it requires no drilling or cutting and is completely reversible if required. It also retains the original BMW rubber bumper trim. The laser-cut mesh section ensures no substantial debris can damage the oil cooler and our design also features an additional venting in the stepped section to further improve air flow. Finished in a high-quality black powder coat finish, the undertray offers improved protection, durability and cooling effectiveness. Please note: The undertray uses existing mounting points – but it is essential the fixings you use to secure it are of good quality. The original BMW fittings should only be used if they’re in good condition. Worn, corroded or broken fixings should be replaced with new items from BMW, as failure to do so may cause the undertray to work loose. Features: · Direct replacement for original BMW G-series M car undertray · Created from 3D scan and CAD software for perfect fitment · Fine mesh protects the exposed low-level BMW oil cooler · Made from high-quality aluminium for increased strength · Uses original mounting points – no cutting or drilling required · Improved cooling ability due to larger venting · Comes in a durable black powder coat finish Registered Design Right number: Application Pending AIRTEC part no: ATMSBMW20

Read more less

As part of our expanding Toyota Yaris GR product range, we’ve developed an aluminium engine cover. This direct replacement part is easy to fit and smartens the appearance of the engine bay, whilst still allowing access to the oil filler cap and dipstick. Raised from the engine to help dissipate heat, the design also features additional venting at the rear, which is closest to the turbo.  Finished in a high-quality black powder coat for durability, the cover comes with all fixtures and fittings, as well as detailed installation instructions.  A simple and effective modification that can be fitted in minutes.  Registered Design Right: Application Pending  AIRTEC part no: ATMSYGR24

Read more less